VRRP between Cisco and Huawei

Objectives

The simulator ticks each one as soon as the network meets it.

1. Configure VRRP group 1 (virtual IP 192.168.10.1) on R1 and R2.
2. Give R1 priority 120 so it becomes master.
3. Track R1 uplink: lower its priority by 30 when the uplink fails.
4. Ping PC2 from PC1 through the virtual gateway.
5. Shut down R1 uplink G0/1 (G0/1): R2 must take over and PC1 must still reach PC2.