Objectives
The simulator ticks each one as soon as the network meets it.
On R1, create ACL 2000 permitting 192.168.1.0/24 and enable Easy IP on G0/0/1 (nat outbound 2000).
Publish SRV: nat server global 203.0.113.10 inside 192.168.1.10 on G0/0/1.
SRV pings HOST (198.51.100.10) through the translation.
HOST pings the public address 203.0.113.10 and reaches SRV; display nat server shows the mapping.
Rate this lab
No ratings yet.
Sign in to rate this lab and keep track of the labs you finish.
Before you start
nat outbound translates sources leaving the interface; nat server translates a public destination arriving on it (and the server’s replies back). nat server protocol tcp global www inside www publishes one port only; without protocol and ports the whole address is mapped, which is what lets a ping through.
Concept
NAT server: publishing an inside server
Source NAT (Easy IP) lets inside hosts start connections out, but nothing outside can reach a private address. NAT server maps a public address — optionally one protocol and port — to an inside server, so outside hosts can reach it.
Concept
NAT overload (PAT / Easy IP)
Private addresses are not routed on the Internet. Port address translation lets many inside hosts share one public address: the router rewrites the source address (and if needed the source port) of outgoing packets and keeps a table to reverse it for replies.