Alcatel-Lucent: LACP link aggregation

Objectives

The simulator ticks each one as soon as the network meets it.

1. Create LACP aggregate 1 with size 2 and enable it on both switches.
2. Give the aggregate actor admin-key 1, and attach ports 1/1/1 and 1/1/3 with the same admin key.
3. Make linkagg 1 a tagged member of VLAN 10 on both switches.
4. Check show linkagg: aggregate 1 is UP with 2 attached ports.
5. Ping PC2 from PC1.