TechNetBuddy

What the exam expects

IS-IS is the other link-state IGP of HCIP: its addressing (NET), levels and areas, how routes move between levels, and adjacency rules.

NETs, areas and levels

Each router has a NET such as 49.0001.0000.0000.0001.00: area 49.0001, system ID 0000.0000.0001, selector 00. Level-1 routers know only their own area; Level-2 routers form the backbone across areas; Level-1-2 routers (the Huawei default) join both. A Level-1 adjacency needs the same area; a Level-2 adjacency does not.

Routes between levels

A Level-1-2 router copies Level-1 routes into Level-2 but not the reverse. When it can reach other areas it sets the ATT bit, and Level-1 routers install a default route toward it. Route leaking (not modelled here) can copy chosen Level-2 routes down.

On VRP

isis 1, is-level level-1, network-entity 49.0001.0000.0000.0001.00, then isis enable 1 on each interface. display isis peer shows neighbours and their levels; IS-IS routes have preference 15.

Commands at a glance

[R1] isis 1
[R1-isis-1] is-level level-1
[R1-isis-1] network-entity 49.0001.0000.0000.0001.00
[R1] interface GigabitEthernet0/0/1
[R1-GigabitEthernet0/0/1] isis enable 1
<R2> display isis peer

Not modelled in the simulator: Route leaking, wide-metric tuning, DIS election details and IS-IS authentication are not modelled.