TechNetBuddy

What the exam expects

About a fifth of HCIA-Datacom is concepts more than configuration: WLAN (10%), WAN (3%), management and O&M (3%) and SDN and automation (3%).

WLAN

A wireless LAN uses the 802.11 family (Wi-Fi 4 to Wi-Fi 6 and later) on 2.4 GHz and 5 GHz radios. In Huawei’s campus design, fit APs are managed by an AC (access controller) over CAPWAP tunnels: the AC holds the profiles (SSID, security, radio), and data is either forwarded directly by the AP or tunnelled to the AC. An AP joins by finding the AC (DHCP option 43, broadcast, or configured), building a CAPWAP tunnel and downloading its configuration.

WAN

PPP carries IP over serial links and negotiates with LCP and NCP; PAP sends the password in clear, CHAP proves knowledge of it with a challenge. PPPoE runs PPP sessions over Ethernet, as broadband access does. MPLS forwards on short labels instead of IP lookups, and segment routing (SR) builds paths from labels advertised by the IGP itself: see chapters 25 and 54 and the HCIP MPLS chapter.

Network management

SNMP lets a network management system read and change device data (MIB objects): the manager polls with Get/Set, the agent sends Traps on events. SNMPv3 adds authentication and encryption. Syslog (info-center) and NTP (ntp-service) keep logs and clocks consistent.

SDN, NFV and automation

SDN separates the control plane into a controller (for Huawei campus networks, iMaster NCE-Campus) that programs devices through southbound interfaces such as NETCONF, and offers northbound APIs to applications. NFV runs network functions as software on standard servers. Automation scripts (often Python, with libraries such as Paramiko or ncclient) configure many devices the same way.

Commands at a glance

[R1] snmp-agent sys-info version v3
[R1] info-center loghost 10.0.0.100
[R1] ntp-service unicast-server 10.0.0.1

Not modelled in the simulator: WLAN, PPP, PPPoE, SNMP behaviour, SDN controllers and scripting are not modelled in this edition. iMaster NCE-Campus is planned (chapter 73).