CCNP SP · L2VPN

IOS XE: point-to-point pseudowire (xconnect)

PC1 and PC2 share one subnet, 192.168.100.0/24, but sit on opposite sides of an MPLS core. IS-IS and LDP already run on PE1, P and PE2. Build a pseudowire between PE1 and PE2 with VC ID 100: every frame entering a customer port leaves the customer port at the far end, as if the core were one long cable.

CCNP SP track · Cisco IOS XE · 4 objectives

Open in simulator More CCNP SP labs

Objectives

The simulator ticks each one as soon as the network meets it.

On PE1, attach the customer port GigabitEthernet0/1 to a pseudowire toward 2.2.2.2 with VC ID 100.
On PE2, do the same toward 1.1.1.1 with VC ID 100.
The pseudowire is up on both PEs (show mpls l2transport vc).
Ping 192.168.100.2 from PC1: the hosts see one Ethernet segment.

Start this lab