TechNetBuddy
Open simulator

Objectives

The simulator ticks each one as soon as the network meets it.

  1. On every switch: ip multicast admin-state enable, ip load pim, and ip pim interface "name" for each IP interface.
  2. On every switch configure ip pim static-rp 224.0.0.0/4 10.0.12.2.
  3. Enable ip pim sparse admin-state enable on every switch.
  4. Join 239.1.1.1 on PC3, then ping 239.1.1.1 from SRC: PC3 replies.
  5. On SW3, show ip multicast group lists 239.1.1.1 on VLAN 30.
Start this lab
← Previous in MulticastAlcatel-Lucent: PIM dense mode on OmniSwitch Next in Multicast →Nexus: PIM sparse mode with a static RP