INTEGRATOR · L2VPN

One VPLS across IOS XE, IOS XR and Huawei

A customer’s three sites land on three different PEs: PE1 runs IOS XE, PE2 runs IOS XR and PE3 runs Huawei VRP. LDP-signaled VPLS is a standard, so they can share one VPN. IS-IS and LDP already run. Build VPN 100 on all three, each in its own commands, so that the three hosts reach each other.

Integrator track · Cisco IOS XE, Cisco IOS XR, Huawei VRP · 5 objectives

Open in simulator More Integrator labs

Objectives

The simulator ticks each one as soon as the network meets it.

PE1 (IOS XE): l2vpn vfi context with vpn id 100, members 2.2.2.2 and 3.3.3.3, joined to the customer port through a bridge-domain.
PE2 (IOS XR): bridge group and bridge-domain with the l2transport customer port, and a VFI with neighbors 1.1.1.1 and 3.3.3.3, pw-id 100.
PE3 (Huawei): mpls l2vpn, remote peers, vsi with vsi-id 100 and peers 1.1.1.1 and 2.2.2.2, and l2 binding vsi on the customer port.
Every PE has two pseudowires up.
PC1 reaches PC2 and PC3.

Start this lab