Objectives
The simulator ticks each one as soon as the network meets it.
VRRP group 1 (virtual IP 192.168.10.254) on R1 and R2; R1 is master (priority 120).
VRRP group 2 (virtual IP 192.168.10.253) on R1 and R2; R2 is master (priority 120).
Both PCs ping the server: PC1’s traffic goes through R1, PC2’s through R2.
On R1, track G0/0/1 in group 1 (reduced 30) and shut that uplink: R2 becomes master of group 1 too, and PC1 still reaches the server.
Rate this lab
No ratings yet.
Sign in to rate this lab and keep track of the labs you finish.
Before you start
vrrp vrid virtual-ip / priority / track interface reduced . The highest priority is master; preemption is on by default on Huawei, so the master returns when its priority does. Give each PC group its own gateway (through DHCP in real networks).
Concept
VRRP load balancing with several groups
One VRRP group has one master, so the backup router forwards nothing. Two groups on one LAN, each mastered by a different router and used by a different set of hosts, share the load while each router still backs up the other.
Concept
HSRP and VRRP: a gateway that survives a failure
Hosts have one default gateway. A first-hop redundancy protocol lets two routers share a virtual IP (and virtual MAC) as that gateway: one router answers for it, the other takes over if it fails.