TechNetBuddy

Objectives

The simulator ticks each one as soon as the network meets it.

  1. On R1, create ACL 3001 matching traffic from PC2 (rule 5 permit ip source 192.168.1.20 0).
  2. Create policy-based-route VIA-R3 permit node 10: if-match acl 3001, apply ip-address next-hop 10.0.13.3.
  3. Apply it where the LAN traffic enters R1: ip policy-based-route VIA-R3 on G0/0/0.
  4. tracert from PC2 goes through R3; from PC1 it still goes through R2; both reach PC4.