Objectives
The simulator ticks each one as soon as the network meets it.
On R2, run display ospf error while the neighbours are refused.
Fix the R1–R2 link: remove the interface setting on R1 G0/0/1 (undo ospf authentication-mode), so the area key applies there.
Fix R3: give area 0 the same MD5 key 1 as R1 and R2.
PC1 pings PC3.
Rate this lab
No ratings yet.
Sign in to rate this lab and keep track of the labs you finish.
Before you start
display ospf error counts refused hellos by reason; an authentication mismatch looks the same whether it is the mode, the key ID or the key. display current-configuration configuration ospf and display this in the interface view show what each router really has.
Concept
OSPF authentication
With authentication every OSPF packet carries a key, and a router refuses hellos whose mode or key does not match its own. It stops a stray or hostile router from joining the routing domain and injecting routes.
Concept
Why OSPF neighbors do not come up
Two OSPF routers become neighbors only if their hellos agree on several parameters. A single mismatch silently stops the adjacency, and every route behind it disappears.