Split one switch into two groups with VLANs

Objectives

The simulator ticks each one as soon as the network meets it.

1. Create VLAN 10 and VLAN 20 on SW1 and on SW2.
2. On SW1, put the PC1 port (GigabitEthernet0/0/1) in VLAN 10 and the PC2 port (GigabitEthernet0/0/2) in VLAN 20.
3. On SW2, put the PC3 port (GigabitEthernet0/0/1) in VLAN 10.
4. Make GigabitEthernet0/0/0 a trunk on both switches, carrying VLANs 10 and 20.
5. From PC1, ping 192.168.10.13 (PC3). It works, but a ping to 192.168.10.12 (PC2) now fails.