Join two networks with a router

Objectives

The simulator ticks each one as soon as the network meets it.

1. Give R1 GigabitEthernet0/0/0 the address 192.168.1.1/24 and switch it on.
2. Give R1 GigabitEthernet0/0/1 the address 192.168.2.1/24 and switch it on.
3. Read display ip routing-table. R1 knows both networks, because it connects to them.
4. Set PC1’s default gateway: ip 192.168.1.10 255.255.255.0 192.168.1.1.
5. Set PC2’s default gateway: ip 192.168.2.10 255.255.255.0 192.168.2.1.
6. From PC1, ping 192.168.2.10.