Objectives
The simulator ticks each one as soon as the network meets it.
Read display ip routing-table on R1 while the fault is there, and tracert from R1 to 192.168.3.10.
Fix R1: its route to 192.168.3.0/24 points at 10.0.12.3. Replace it with a route through R2 (10.0.12.2).
Fix R3: add the missing return route to 192.168.1.0/24 through R2 (10.0.23.2).
PC1 pings PC3.
Rate this lab
No ratings yet.
Sign in to rate this lab and keep track of the labs you finish.
Before you start
A static route whose next hop is not on a connected subnet (or does not answer ARP) cannot forward. undo ip route-static removes one route. Every hop needs a route there and back: check the far end too.
Concept
Static routes and the routing table
A static route is an entry you type yourself: “to reach this network, send to this next hop”. Routers know only their directly connected subnets until you add routes or run a routing protocol.
Concept
How a router forwards a packet
A router reads the destination IP address, finds the best matching route and sends the packet out of that route’s interface. The IP header stays end to end; the Ethernet header is rebuilt on every hop.